Decora/Rocker Cutout
Single-gang cover with a decora/rocker-style cutout. Includes both a standard size and a +0.5cm oversized "Large" size.
Single Gang Light Switch Cover
A clean, minimal single-gang switch cover plate, available with a decora/rocker-style cutout, a toggle-style cutout, or as a blank cover (no cutout) for unused or decorative switches. Each version includes a standard size and a slightly oversized "Large" version (+0.5cm on all sides) for covering paint buildup, chipped edges, or slightly oversized wall openings. The toggle style is posted as its own separate listing, see its style card below for its own View Design links.
Print Settings
- Orientation
- Back face flat against the print bed, for the best finish on the visible side
- Infill
- 15–20% grid
- Layer Height
- 0.16mm
- First Layer Height
- 0.2mm
- Perimeters
- 2
- Supports
- Honeycomb, auto-generated
Blank Cover
Single-gang cover with no cutout, for unused or decorative switches. Includes both a standard size and a +0.5cm oversized "Large" size.
Toggle Switch Cutout
Single-gang cover with a toggle-style cutout. Includes both a standard size and a +0.5cm oversized "Large" size.