Blank + Hue Holder Version 1
A blank panel on one side, Hue remote holder on the other. Standard screw mounts. Mirror in your slicer for the opposite-side layout. Includes a standard size and a +0.5cm oversized "Large" size.
Double Gang Philips Hue Remote Holder Wall Plate
A double-gang wall plate combining a Philips Hue Smart Button/Dimmer Remote holder on one side with either a blank panel or a Decora/rocker cutout on the other, useful for mounting a Hue remote right next to an existing switch, or on its own with a blank second gang. Available in standard and oversized (+0.5cm all sides) versions. Need the holder on the opposite side? Don't rotate the part, the holder's shape is directional, so a 180° rotation points it the wrong way. Use your slicer's Mirror tool instead (in PrusaSlicer: right-click the model, click Mirror, then choose an axis), try the X-axis first, and if it still faces the same way, undo and try the Y-axis. Requires 2x 10mm x 2mm magnets per print (not included). Designed in SolidWorks.
Print Settings
- Orientation
- Back face flat against the print bed, for the best finish on the visible side
- Infill
- 15–20% grid
- Layer Height
- 0.16mm
- First Layer Height
- 0.2mm
- Perimeters
- 2
- Supports
- Honeycomb, auto-generated
Blank + Hue Holder Version 2
Same blank + Hue holder layout as Version 1, with the exposed screw mounts removed on the flat section for a cleaner look. Mirror in your slicer for the opposite-side layout. Includes a standard size and a +0.5cm oversized "Large" size.
Decora + Hue Holder
A decora/rocker cutout on one side, Hue remote holder on the other. Mirror in your slicer for the opposite-side layout. Includes a standard size and a +0.5cm oversized "Large" size.